English 
German 
Operating Bus
- 1/34If you’re operating a city bus
Bus drivers in cities must respect all local signals, pedestrian zones, and yield to vulnerable users.
When a bus is pulling out from a stop
In built-up areas, cars must yield when a bus indicates intent to merge.
At pedestrian crossings
Bus drivers must stop for any pedestrian already on the crossing.
If a passenger is boarding or exiting
Smooth halts are required to ensure passenger safety and prevent injuries.
When driving on roads with bike lanes
Buses must not cross cycle lanes without checking blind spots and indicating.
At school zones
In school zones, buses must reduce speed and watch for children.
If your bus has standing passengers
To prevent falls, bus operation must be smooth when people are standing.
When operating during rush hour
Bus drivers must manage tight schedules with full attention to surroundings.
If visibility is poor
In fog, rain, or snow, buses must drive cautiously with proper lighting.
When fatigue is felt
Driving time regulations ensure rest after 4.5 hours of operation.
If a cyclist enters your blind spot
Always check mirrors and blind spot zones before maneuvering.
When approaching a roundabout
Buses must yield to traffic in the roundabout unless priority is marked.
At railway crossings
It mandatory to stop, look, and listen before proceeding.
When loading passengers with reduced mobility
Buses must be fully stopped and stabilized before using access aids.
If a passenger activates the stop button
Stop safely at the next marked location to pick up or drop off passengers in a safe, designated area.
When driving in narrow streets
Narrow lanes require slower speeds and careful mirror checks.
At bus terminals
Terminals often have internal routes that buses must strictly follow.
When operating near schools
School zones may have children crossing outside marked crosswalks.
If there an onboard emergency
Emergency protocols require contacting base and assessing next steps.
When distracted by passengers
Drivers must avoid long conversations or distractions from riders.
If the road is icy or slippery
Speed, braking, and turning must be adapted to weather conditions.
When buses operate in mixed traffic
Unless in a dedicated lane, buses must follow general road rules.
If mirrors or cameras are obstructed
Do not operate until visibility is restored to ensure safe driving and prevent accidents.
When arriving late at a stop
Timeliness cannot come at the expense of safety regulations.
If an accident occurs
Drivers must manage the scene, inform base, and follow protocol.
When bus weight exceeds normal
Heavier buses must stick to designated and structurally safe roads.
At traffic lights
Priority lights bus-only override normal signals when present.
If another bus is blocking your bay
Wait in the queue or follow dispatch guidance to maintain order and ensure safe, efficient boarding
When passengers are elderly or disabled
Allow extra boarding time and assistance to ensure all passengers board safely and comfortably
If onboard surveillance fails
Buses often require functional cameras for security compliance.
If you’re operating a school bus near children
Children may behave unpredictably near the bus, so drivers must be alert and ready to stop at any moment.
When loading or unloading students
The bus must stop fully with warning signals on, and students should only cross when the area is safe.
At designated school bus stops
Picking up or dropping off outside marked stops can create dangerous situations for students.
If a child crosses in front of the bus
Drivers must ensure children are fully out of the danger zone before proceeding.